With Raicam brakes, you really stand out, especially if you choose the top-of-the-line Racing models that are red:

And the brown Kevlar and steel mesh hoses.

The monoblock calipers stand out, especially since the piston installation caps are visible on the outside:

What is the difference between Racing, Factory, and Performance in RGR 4 pistons?
In RGR Racing, you get additionally:
the red color, which is somewhat harder and more expensive to obtain on the production line
R1 hoses - specially braided with kevlar and steel, designed to withstand extreme pressures during steep descents (Enduro/DH), eliminating any hydraulic pressure loss - compared to R3 Kevlar in Factory and Performance
additional free stroke adjustment available by hand, without tools
two bearings on the lever of the pump drive compared to bushings like in Factory and Performance
The monoblock calipers with polymer pistons for thermal insulation of the brake fluid from the high temperatures of the brake pads are the same in all 3 models, differing only in color.
Conclusion RGR Racing vs Factory vs Performance
All 3 models offer the same efficiency and safety in braking, maintenance-free, without bleeding on the field.
The Racing range adds top hoses, more efficient, bearings instead of bushings, and the much-desired red color.
What is the difference between Racing, Factory, and Performance in RXC 2 pistons?
In RXC Racing, you get additionally:
the red color, which is somewhat harder and more expensive to obtain on the production line
R2 hoses - braided with kevlar and textile fiber, ultra-light, optimized to reduce the weight of the assembly in cross-country while maintaining rigidity under pressure. - compared to R3 Kevlar in Factory and Performance
weight: 78 grams for the pump compared to 83 g for Factory and 108 g for Performance
Carbon composite lever
Titanium lever axle
The monoblock calipers with two polymer pistons for thermal insulation of the brake fluid from the high temperatures of the brake pads are the same in all 3 models, differing only in color and weight.
Conclusion RXC Racing vs Factory vs Performance
All 3 models offer the same efficiency and safety in braking, maintenance-free, without bleeding on the field.
The racing range adds top hoses, more efficient, a Carbon lever, and a Titanium axle to reduce weight and the much-desired red color.
Where have we tested Raicam brakes so far?
Alex tested a pair of RGR Racing in Maribor, with intensive use, for a week, on downhill trails, we are waiting for his feedback.
How easy is it to install? Are specific tools required?
As for installation, it was a combined effort; I routed the hoses through the Commencal Supreme V5 frame (quite stiff, of course, you want them not to expand during braking) while Alex made the connections and the bleeding, a piece of cake, just like Shimano, with a cup up and a syringe down. Otherwise, standard tools that you should have on hand, such as
A hydraulic hose cutter, this cut must be made like those for optical cables, perpendicular to the sheath. A multifunctional pliers is also good. This slightly compresses the hose but with a wrench, you can bring it back to its original shape:


We all know the insertion tools for pins in hydraulic hoses, available on bikeverse:


It is a meticulous operation that we managed even on the field, without tools, in case of emergency when Alex's TRP brake lever broke at Mărișel and we had to replace it with a spare pump - caliper set, Shimano Saint. This was in the trunk, front and rear, after an unfortunate episode in Sinaia, on an easy trail, I admit, a bit untraveled when a branch broke the rear brake hose from the caliper on the Supreme V3, ... A few days ago, I discovered that I also have a Magura MT5 lever, even though I no longer have Magura brakes on any bike now...
The surprise offered by Raicam regarding the pin insertion
You do not need any insertion tool.
The pin has a thread that screws into the inner sheath of the hydraulic hose using a simple 2 mm Allen key:

Okay, I have gone on too long about the installation; we will detail in a later episode.
Who are Raicam? Technology presentation
In the article Raicam Launch in Romania: Revolutionary Braking Systems for XC, MTB, and E-Bike I included the history of the company and the main technologies that differentiate Raicam from other bicycle brake system manufacturers.

Raicam Launch in Romania: Revolutionary Braking Systems for XC, MTB, and E-Bike on Bikeverse
Learn all about the launch of Raicam brakes on Bikeverse. Detailed technical analysis of the RXC and RGR ranges, differences between pumps, calipers, R1-R3 hoses, and ceramic pads.
Raicam brakes in the Black Friday campaign on Bikeverse - 79 items
Today we announce that there are 79 Raicam items in the Black Friday campaign, with discounts between 10 and 15%:
Shop
raicam
79 results
Can I find everything I need on BIKEVERSE for installation?
From BIKEVERSE you can get the complete Raicam set, brake pumps, calipers, brake discs, as well as other accessories you need, such as the bleeding kit:

or pump adapters to mount them on Shimano or SRAM gear shifters:


Everything is on BIKEVERSE for Black Friday and available in installments - up to 24 interest-free installments
Stylish brakes, lightweight, efficient, and without bleeding on the terrain - with Raicam!






